Dope fork leg moves
When you work among other professionals that are all doing the same thing and continually working on getting better and faster you come up with some bad ass moves from time to time. I while back after doing about 1000 chrome fork legs on 41mm front ends I found that you don’t have to change the fork oil! I know that sounds psycho but this is how it works………
Remove the 41mm fork legs from your ride, re-install the gasketed top bolts and sit them upside down for at least 20 minutes. This allows the fork oil to flow up into the sliders. Then remove the fork leg seal circlips, remove the bolts at the very bottom of the fork legs (the top if now if you are holding it right), and slide hammer those lame, un-chromed, stock fork legs off.
From here you just have to go back together in reverse with a new fork seal. I know that I made it sound pretty easy but our fork leg Hog Bite download will go through all the fork leg parts in better detail to make this super easy to do (that was a shameless plug by the way).
If you are looking for any tech tips in particular please shoot us an e-mail and I’ll be happy to post them.
Thanks Build A Hogers
Michael Durham
