Sportster forks
Do you have a Hog Bite that covers Sportster front forks?
Thanks
Hi there,
The Hog Bite for 41mm front ends will give you the same info for your Sportster. The only differences will be that the fork caps on your fork tubes are spring loaded so be careful when you take them off because they will pop up at you. I have found that it is good cover your socket with a rag just in case the cap pops off.
The only other difference will be that you will need to remove a dust cover to get to the fork seal.
Besides those two differences they will be the same.
Thanks,
Michael Durham
December 3rd, 2009 at 5:25 am
Hi Guys, I’m writing from belgium, I’ve a 883R 2009.
Last Week, a driver made a hit and run, the front is dead. I’m a quiet lost
to find the
right parts in websites, could you give me a hand?
I need: a new fork (the all tree and the two tubes) the lower part of the
fork is ok. I need also a black front fender. The front wheel is ok but it
needs a new axle. A black handelbar OEM or black drag bar. A KN air filter.
A black oil filter. And chrom drag pipes short guns, thanks !
April 8th, 2010 at 9:14 pm
The only way to pick up those specific parts will be to order them from a dealership. You can try shopping for them on e-bay but a dealer will be your best bet.
Thanks